Check visible area of poly-V belt for wear - AP13.22-P-1352V
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2020 Mercedes-Benz SLC300, 2019 Mercedes-Benz SLC300, 2018 Mercedes-Benz SLC300, 2017 Mercedes-Benz SLC300, and 2016 Mercedes-Benz SLK55 AMG. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 152, 271, 274, 276, 651 in MODEL 172
ENGINE 271 in MODEL 171
| Check | |||
| 1 | Check poly-V belt (1) for wear and damage at visible points and compare with damage profiles | AP13.22-P-1351-01A | |
| If wear or damage is present: ↓ Replace the poly-V belt (1), subject to a separate repair order. |
|||
| Remove | |||
| 2 | Remove bottom engine compartment paneling | ||
| Model 171 | AR61.20-P-1105V | ||
| Model 172 | AR61.20-P-1105W | ||
| Check | |||
| 3 | Check poly-V-belt (1) for wear and damage at visible points when vehicle is raised, and compare with damage profiles | AP13.22-P-1351-01A | |
| If wear or damage is present: ↓ Replace the poly-V belt (1), subject to a separate repair order. |
|||
| Install | |||
| 4 | Install lower engine compartment paneling | ||
| Model 171 | AR61.20-P-1105V | ||
| Model 172 | AR61.20-P-1105W |