Only lines are indicated on display in instrument cluster (IC) - AF58.40-P-8000A

MODEL 230 

MODIFICATION NOTES

20.11.01

Supersedes STIP 54.30-060 dated 16.11.2001

Damage code	Cause	Remedy
	In the Sensotronic Brake Control (SBC), the display and warning buzzer in the instrument cluster (IC) are deactivated during diagnosis with DAS.	Before quitting the SBC system: ↓
	Deactivation remains active even after conclusion of the diagnostic session. The result is that only lines are indicated in the display.	Reactivate display and warning buzzer in SBC under menu point "Switch on warning buzzer in instrument cluster!". No additional warranty or goodwill costs are incurred.