Magnetic Clutch For The Mechanical Supercharger - Design - GF09.50-P-3103-03AM

Fig 1: Identifying Magnetic Clutch For Mechanical Supercharger Components - Design

Courtesy of MERCEDES-BENZ USA

There Is An Air Gap Between The Rotor (80/5) And The Anchor (80/7) Of Between 0.3 And 0.5 Mm Which Is Not Under Power And Which Cannot Be Adjusted.

He Magnetic Clutch For The Mechanical Supercharger (Y2/1) Can Only Be Replaced As A Complete Unit With The Compressor.