Display service function - GF00.20-P-2010R

MODEL 230

Display of the service to be performed

In addition to the service displays, the service to be performed (A or B) is also displayed.

To this end, the service symbol (wrench) appears once or twice in the display.

The service symbol is displayed

Once in the case of service A
Twice in the case of service B.

Service A is basically followed by service B. Following a service B, the following service must be calculated under consideration of the kilometer readings. If the distance covered in the current interval is less than 22, 000 km, this is followed by service A, otherwise by service B. This calculation is carried out automatically in the instrument cluster (A1).

In the service sheet, the displayed service A or B can be processed without calculation of the path.

Display of service A; small scope (Example)

Fig 1: Identifying Service Symbol And Label

Courtesy of MERCEDES-BENZ USA

Display of service B; large scope (Example)

Fig 2: Identifying Service Symbol And Label

Courtesy of MERCEDES-BENZ USA

Remaining distance function

GF00.20-P-2007R