| B82 |
Vehicle interior humidity/temperature sensor |
28L |
| CAN B |
Interior CAN |
14K |
| M16/33 |
Left B-pillar air distribution actuator motor |
17L |
| M16/34 |
Right B-pillar air distribution actuator motor |
20L |
| N10/1 |
Front SAM control unit with fuse and relay module |
24L |
| N10/1 |
Front SAM control unit with fuse and relay module |
4L |
| N10/1 |
Front SAM control unit with fuse and relay module |
11L |
| N22/1 |
AAC [KLA] control unit |
4A |
| N22/1 |
AAC [KLA] control unit |
12A |
| N61 |
Heated windshield control unit |
37L |
| U1023 |
Valid for humidity/temperature sensor |
23G |
| U1023 |
Valid for humidity/temperature sensor |
26H |
| U1023 |
Valid for humidity/temperature sensor |
23D |
| U1029 |
Not valid for humidity/temperature sensor |
22D |
| U441 |
Valid for special protection |
32E |
| U66 |
Valid for rear air conditioning |
29E |
| W34 |
Ground (left footwell) |
2G |
| X30/34 |
Interior CAN/cockpit voltage distributor connector |
14L |
| X53/1 |
Air conditioning connector |
16E |
| X53/1 |
Air conditioning connector |
30G |
| X53/1 |
Air conditioning connector |
33J |
| Z110/1z1 |
AC bus solder terminal |
23E |
| Z110/2z1 |
AC bus solder terminal |
19G |
| Z110/2z1 |
AC bus solder terminal |
25G |
| Z111z1 |
Voltage supply connector sleeve |
20G |
| Z111z1 |
Voltage supply connector sleeve |
24G |
| Z111z2 |
Voltage supply connector sleeve |
11G |
| Z50/37 |
Air conditioner compressor ground connector sleeve |
4G |
| Z68/15 |
Heated windshield LIN bus ground connector sleeve |
37G |
| Z68/16 |
Heated windshield LIN bus positive connector sleeve |
33G |
| Z68/17 |
Heated windshield LIN bus data connector sleeve |
38G |
| Z68/3 |
AC LIN bus data connector sleeve |
12G |
| Z7/60z1 |
5V output connector sleeve (solder connector in wiring harness) |
5E |
| Z7/72z1 |
COC nozzles and sensors sensor ground connector sleeve |
10G |
| Z81/11 |
Front passenger circuit 58d connector sleeve |
7G |