Remove/install door frame seal - AR72.10-P-2120SX

MODEL 221.0 

MODEL 221.1 except CODE (Z07) Top protection 

Fig 1: Identifying Door Frame Seal Remove/Install Component

Courtesy of MERCEDES-BENZ USA

	Removing
1	Remove door liner (1) from front door		AR72.10-P-1000SX
2	Remove inner paneling (2) from window frame		AR72.10-P-6580SX
3	Remove paneling (3)
4	Completely remove door frame seal (4) from front door
5	Remove glue residues from front door and clean bonding surface using eraser disc	Bonding surface must be free of grease and dust. Removal disk, Ø 100 mm with fixing shank, 3M Deutschland GmbH D-41453 Neuss Drill
		Cleaner	*BR00.45-Z-1025-04A
	Notes on removing adhesive residues and foils on paint and metal surfaces with surface conditioning disks		AH00.00-P-0013-01AK
	Install
6	Glue door frame seal (4) onto front door and roll on	Ensure that door frame seal (4) is seated correctly.
			Figure
7	Position sealing lip on door sealing frame (4) in relation to upper seal	Sealing lip on door sealing frame (4) must be located above the upper seal.
			Figure
8	Install paneling (3)
9	Install inner paneling (2) on window frame		AR72.10-P-6580SX
10	Install door liner (1) on front door		AR72.10-P-1000SX

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Roller (171 589 06 63 00)

Courtesy of MERCEDES-BENZ USA