Legend of electrical function schematic for washer nozzle/washer nozzle hose heating - PE82.35-P-2052-60SAA
Model 221.0/1 as of model year 09/YoM 08
| Code | Designation | Coordinates |
|---|---|---|
| A8/1 | Transmitter key | 12B |
| B14 | Outside temperature display temperature sensor | 9J |
| G2 | Generator | 3J |
| N3/9 | CDI control unit | 3B |
| N3/10 | ME-SFI [ME] control unit | 3D |
| N3/10 | ME-SFI [ME] control unit | 3G |
| N10/1 | Front SAM control unit with fuse and relay module | 11E |
| N73 | EIS [EZS] control unit | 11A |
| N93 | Central gateway control unit | 7E |
| R2/1 | Washer nozzle heater | 14E |
| R2/11 | Washer nozzle hose heater | 11K |
| U74 | Valid for diesel engines | 2B |
| U75 | Valid for gasoline engines | 2D |
| U708 | Valid for washer nozzle hose heater | 11J |
| CAN B | Interior CAN | 9E |
| CAN B | Interior CAN | 11D |
| CAN-E | Chassis CAN | 5E |
| LIN C1 | Drive train LIN | 1G |
| 1 | Circuit 61, status | 2D |
| 1 | Circuit 61, status | 6F |
| 1 | Circuit 61, status | 10E |
| 2 | Circuit 15, status | 12D |
| 3 | Temperature sensor for outside temperature indicator, signal | 10F |
| 4 | Washer nozzle heater, actuation | 14E |
| 5 | Washer nozzle hose heater, actuation | 12J |