Retrofit COMAND remote control - AN82.85-P-0010SX
MODEL 221.0## (except 221.077) 1# except CODE (494) USA version except CODE (498) Japan version with CODE (800) Model year 2010
MODEL 221.1## (except 221.177) 1# except CODE (494) USA version except CODE (498) Japan version except CODE (Z07) Top protection with CODE (800) Model year 2010
| Removing | |||
| 1 | Open cover of glove compartment (2) | ||
| 2 | Open lid for rear armrest (3) and remove stowage compartment (4) | ||
| Fig 3 | |||
| Install | |||
| 3 | Retrofit COMAND remote control (1) for front passenger | AN82.85-P-0010-01SX | |
| 4 | Retrofit COMAND remote control (1) for rear passengers | AN82.85-P-0010-02SX | |
| 5 | Connect STAR DIAGNOSIS | ||
| 6 | Enter special equipment on the vehicle data card and the online vehicle data card | ||
| 7 | Carry out variant coding with the Diagnosis Assistance System by means of Software Calibration Number (SCN) | ||
| 8 | Close STAR DIAGNOSIS | ||
| 9 | Perform function test on COMAND remote control (1) | ||
| 10 | Close lid of rear armrest (3) | ||
| 11 | Close lid of glove box (2) |
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| DG 99 | Scope of delivery for COMAND remote control | 1 |