Removing and installing headlamp range control module - AR82.10-P-4081M
MODEL 215, 220 with CODE (612b) Xenon headlamps
Illustrated on model 220
Fig 1: Identifying Headlamp Range Control Module Remove/Install Components - Illustrated On Model 220
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | AR54.10-P-1030-07I | |
| 2 | Disconnect ground lead from battery | ||
| 3 | Fold back floor covering in passenger footwell and remove Styrofoam panel | ||
| 4 | Remove mounting plate (1) in passenger footwell and fold down into footwell | ||
| 5 | Release catch and disconnect connector (2) | ||
| 6 | Unscrew screws (3) and remove headlamp range adjustment control module (N71) from mounting plate | ||
| 7 | Install in opposite order |