Remove/install windshield washer system pump - AR82.35-P-6002SX

MODEL 216.386 

MODEL 221.0/1 except CODE (487) Active Body Control (ABC) 

Fig 1: Identifying Windshield Washer System Pump Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Loosen washing water reservoir (1)		AR82.35-P-6000-01SX
2	Unclip windshield washer fluid pump (M5/1) and remove	Collect washer fluid which flows out. Check gasket (2) and replace if necessary.
			Figure
3	Detach electrical connector on windshield washer fluid pump (M5/1)
4	Detach washer fluid hose from windshield washer fluid pump (M5/1)
5	Install in the reverse order
6	Fill washer fluid reservoir (1)
	Windshield washer system - inspect fluid level, adjust to correct level		AP82.35-P-8210SX
7	Check windshield washer system for proper operation
	Windshield wipers, windshield washer system and headlamp cleaning system - function check		AP82.30-P-8252SX

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA