Remove/install antenna amplifier module - AR82.62-P-8300SXS

MODEL 221.1 with CODE (Z07) Top protection 

Fig 1: Identifying Antenna Amplifier Module Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Notes on avoiding damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on avoiding damage to windows installed in special high-security vehicles		AH67.00-P-0003-01FB
1	Remove headliner		AR68.30-P-4300SXS
2	Remove splinter protection strip (1)		*BA65.10-P-1002-01B
3	Remove guard plate (2)	Make sure that the electric wiring harnesses for the rear window antenna amplifier module (A2/12) are not crushed or pinched, as otherwise the rear window antenna amplifier module (A2/12) may malfunction.
			*BA65.10-P-1001-01B
4	Disconnect electrical connectors (3) from rear window antenna amplifier module (A2/12)	The number of electrical connectors (3) differs depending on the vehicle equipment.
5	Unscrew nuts (4)
6	Remove rear window antenna amplifier module (A2/12)
7	Install in the reverse order

ROOF

Number	Designation		Model 221.1 with code Z07/Z07+Z19
BA65.10-P-1001-01B	Bolt, antenna amplifier protective plate on roof frame protective plate	Nm	28
BA65.10-P-1002-01B	Bolt, splinter guard on antenna amplifier protective plate	Nm	8