Remove/install antenna amplifier module - AR82.62-P-8300I

MODEL 215, 220 

Shows model 220 

Fig 1: Identifying Antenna Amplifier Module Remove/Install Components - Shown On Model 220

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge
1	Disconnect battery ground cable
2	Remove headliner	Model 215	AR68.30-P-4300N
		Model 220.0/1
3	Detach couplings (1) on antenna amplifier module (A2/12)
4	Remove nuts/bolts (2)
5	Slightly lower antenna amplifier module (A2/12) and, together with the contact arms (3), slide towards the luggage compartment and out of the guides	Ensure correct positioning of sliding contacts (3a) on contact arms (3).
6	Install in the reverse order