Remove and install COMAND operating, display and control module - AR82.85-P-1000M
MODEL 220 as of 1.9.02
| Remove/Install | |||
| Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. |
||
| 1 | Disconnect ground cable of battery | ||
| Notes on battery | |||
| Notes on AGM battery | Model 220.028 with CODE (450) Taxi version. Models 220.070/075/175/178/875/878 as of 1.1.01. | ||
| 2 | Remove control and operating unit | ||
| 3 | Unclip cover (2) from mounts on right and left with assembly wedge | ||
| Figure | |||
| 4 | Unscrew screws (1) | ||
| 5 | Pull COMAND operating, display and control module (40/3) out of center console | ||
| 6 | Disconnect fiber optic cable and electrical connectors and remove COMAND operating, display and control module (40/3) | ||
| 7.1 | Cover fiber optic cable | AR82.95-P-0005-01A | |
| 8 | Install in the reverse order | ||
| 9 | Read diagnostic trouble code memory and erase | ||
| Connect STAR DIAGNOSIS, interrogate fault memory | AD00.00-P-2000-04A | ||
| STAR DIAGNOSIS system. | *WH58.30-Z-1048-13A | ||
| 10 | Perform function check |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation | |
|---|---|---|
| WH58.30-Z-1048-13A | STAR DIAGNOSIS diagnosis system, Compact Passenger Car | 6511 1801 00 |