LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> S63 >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - 221 Chassis - 1 Of 2 >> Basic Knowledge >> Comfort and sport switch, component description - GF32.31-P-5110SXU

Comfort and sport switch, component description - GF32.31-P-5110SXU

MODEL 221 with CODE (494) USA version with CODE (489) Airmatic (semi-active air suspension) up to Model Year 8 

The transmission modes button is located in the front central operating unit. The driver can choose between two transmission modes "S" (sport) and "C" (comfort).

Fig 1: Identifying Front Central Operating Unit And Transmission Modes Button
G10127115Courtesy of MERCEDES-BENZ USA

Different suspension conditions belong to the transmission modes:

Transmission mode ("C" or "S") selected when driving forwards is also active when drive position "R" (reverse gear) is engaged.

The operations of the transmission modes button are read in by the front central operating unit and placed on the telematics CAN.

The instrument cluster receives signal via the COMAND control unit (A40/3) (A1) and places it on the central CAN to the central gateway control unit (N93).

The selection (comfort program or sport program) is stored in the instrument cluster so that after an engine start the same performance map is valid as before switching off the ignition. The AIRmatic with ADS control unit (N51) receives the signal "S" or "C" from the central gateway control unit via the chassis CAN.

IMPORTANT The transmission modes button has a dual function:

The current transmission mode "C" or "S" is displayed in the lower status display of the instrument cluster.

Fig 2: Comfort Program C And Sport Program S Instrument Cluster Display
G10127116Courtesy of MERCEDES-BENZ USA