Check visible area of poly-V belt for wear - AP13.22-P-1352SZ

ENGINE 275 in MODEL 216, 221 

Fig 1: Checking Poly-V Belt Visible Area For Wear

Courtesy of MERCEDES-BENZ USA

MODIFICATION NOTES

2.3.12

Check poly-V belt for damage, added

Operation step 1, 4

	Checking
	Risk of injury  caused by fingers being pinched or crushed  when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof	Keep body parts and limbs well clear of moving parts.	AS00.00-Z-0011-01A
1	Check poly-V belt (1) for wear and damage at visible points and compare with damage profiles	Replace poly-V belt (1) if necessary, subject to separate invoice.	AP13.22-P-1351-01A
	Remove/install
2	Lift vehicle on vehicle lift		AR00.60-P-1000SX
3	Remove bottom engine compartment paneling	Vehicles without code (Z07) Top protection	AR61.20-P-1105SX
		Vehicles with code (Z07) Top protection Install engine compartment paneling only after completing all maintenance jobs.	AR61.20-P-1105SXS
	Checking
4	Check poly-V-belt (1) for wear and damage at points visible when vehicle is raised, and compare with damage profiles	Replace poly-V belt (1) if necessary, subject to separate invoice.	AP13.22-P-1351-01A
5	Install in the reverse order