Retrofit AMG retainer button - AZ72.10-P-0005SX

MODEL 221 

Fig 1: Identifying AMG Retainer Button

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove door linings from front door
		Model 221.0 Model 221.1 except code (Z07) Top protection	AR72.10-P-1000SX
2	Remove door linings from rear doors
		Model 221.0 Model 221.1 except code (Z07) Top protection	AR72.12-P-1010SX
3	Mark position of standard front and rear retainer buttons on linkage and remove retainer buttons	The standard retainer buttons are provided with a thread and can be unscrewed from the linkages.
	Install
4	Apply Loctite 243 to AMG retainer buttons (1) inside and screw to linkage to marked position.	The AMG retainer buttons (1) must be flush with the top edge of the door linings when locked. The labeling "AMG" must be legible from inside.
		Loctite 243	*BR00.45-Z-1133-02A
5	Install door linings on front doors
		Model 221.0 Model 221.1 except code (Z07) Top protection	AR72.10-P-1000SX
6	Install door linings on rear doors
		Model 221.0 Model 221.1 except code (Z07) Top protection	AR72.12-P-1010SX

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1133-02A	Loctite 243	A 613 989 09 71

PARTS ORDERING NOTES

Part no.	Designation	Quantity
A 000 766 04 28	Safety knob	4