Wiring diagram for Parktronic system (PTS) control unit - PE54.65-P-2101-97SAC
MODEL 221.0 as of 1.9.07, 221.1 with CODE (220) PARKTRONIC up to model year 2010 /CY 09 model refinement package, control unit N62
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 32L |
| A44/3 | Rear PTS warning indicator | 21L |
| B8/1 | Outer left front PTS ultrasonic sensor | 2L |
| B8/10 | Outer left rear PTS ultrasonic sensor | 29L |
| B8/2 | Center left front PTS ultrasonic sensor | 4L |
| B8/3 | Inner left front PTS ultrasonic sensor | 6L |
| B8/4 | Inner right front PTS ultrasonic sensor | 8L |
| B8/5 | Center right front PTS ultrasonic sensor | 9L |
| B8/6 | Outer right front PTS ultrasonic sensor | 11L |
| B8/7 | Outer right rear PTS ultrasonic sensor | 23L |
| B8/8 | Inner right rear PTS ultrasonic sensor | 25L |
| B8/9 | Inner left rear PTS ultrasonic sensor | 27L |
| CAN B | Interior CAN | 18K |
| N10/2 | Rear SAM control unit with fuse and relay module | 14L |
| N62 | PTS control unit | 28A |
| N62 | PTS control unit | 4A |
| N62 | PTS control unit | 12A |
| N62 | PTS control unit | 20A |
| W7/1 | Ground (right taillamp in trunk) | 14E |
| X25/8 | Overhead control panel and FFS [RBA] connector | 20E |
| X26/27 | PTS, front bumper connector | 1E |
| X30/33 | Right interior CAN/FFS [RBA] voltage distributor connector | 18L |
| X35/28 | PTS, rear bumper connector | 22E |
| Z36/1z1 | Rear PTS sensor ground connector sleeve | 28G |
| Z36/2z1 | Rear parking system sensors positive line connector sleeve | 26G |
| Z36/3z1 | Front PTS sensor ground connector sleeve | 5G |
| Z36/4z1 | Front PTS sensor voltage supply connector sleeve | 9H |