Retrofit reversing camera - AN54.65-P-0030SX

MODEL 221.0##/1## 1A as of 122604 up to 154194 with CODE 806 (Model year 2006) with CODE 807 (Model year 2007) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 808 (Model year 2008) 

MODEL 221.0##/1## 1A up to 122603 without CODE 494 (US version) without CODE 498 (Japanese version) 

Fig 1: Retrofitting Reversing Camera

Courtesy of MERCEDES-BENZ USA

	Remove
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove left front seat
			AR91.10-P-1000SX
2	Remove rear seat backrest	Left
		except CODE 223 (Rear bench seat with electrically adjustable outer seats with PRE-SAFE positioning function for outer seats and outer head restraints) except CODE 224 (Design individual rear seat system)	AR91.12-P-1620SY
		with CODE 223 (Rear bench seat with electrically adjustable outer seats with PRE-SAFE positioning function for outer seats and outer head restraints) with CODE 224 (Design individual rear seat system)	AR91.12-P-1620SX
	Risk of explosion  from explosive gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
3	Disconnect battery ground line
			AR54.10-P-0003SX
4	Remove trims in trunk
		except CODE (Z07) Maximum protection Except right side coverings.	AR68.30-P-4600SX
5	Remove SAM control unit with fuse and relay box in luggage compartment
			AR54.21-P-1258SX
		Do not disconnect electrical connections.
6	Remove COMAND controller unit
		except code (529) HIGH Class Japan	AR82.85-P-1100SX
7	Fold up left floor coverings and open cable ducts of left frame floor assembly
	Install
8	Retrofit backup camera control unit		AN54.65-P-0030-01SX
9	Retrofit camera		AN54.65-P-0030-02SX
10	Retrofit the backup camera wiring harness		AN54.65-P-0030-03SX
11	Install in the reverse order	Operation steps 7 to 1.
12	Perform retrofit variant coding
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		Using STAR DIAGNOSIS carry out variant coding for activating the backup camera functions.
13	Calibration of the backup camera
			AR54.65-P-0022SX
14	Add special equipment to the vehicle data card and to the on-line vehicle data card	Enter code 218 Backup camera.