Legend of wiring diagram for intercom control unit - PE82.90-P-2101-60SFA
Model 221.0/1 with CODE (Z07) Top protection control unit N26/13
| Code | Designation | Coordinates |
|---|---|---|
| A0 | Color code key | 15L |
| B25/4 | Left outside mirror microphone | 10L |
| B25/4x1 | Left outside mirror microphone connector | 10J |
| B25/5 | Right outside mirror microphone | 11L |
| B25/5x1 | Right outside mirror microphone connector | 11J |
| F7 | Fuse box I, rear | 3L |
| F7f10 | Fuse 10 | 1K |
| H10 | Outside speaker | 5L |
| H10/1 | Inside speaker | 6L |
| H10/1x1 | Inside speaker connector | 6K |
| N26/13 | External communication control unit | 4A |
| N26/13 | External communication control unit | 12A |
| W7/1 | Ground (right taillamp in trunk) | 3H |
| X30/12 | Radio mute connector | 8L |
| X30/12 | Radio mute connector | 9L |
| X44/10 | PAS [GAS] outside speaker connector | 5H |
| X58/3 | Microphone separation point | 13L |
| Z6/1 | Ground connector sleeve | 3E |
| Z7/40 | Tml. 30 connector sleeve | 1E |
| Z87/10 | Cable end bared 5 mm, terminal of radio mute connector | 7E |