Exterior lights, function - GF82.10-P-0003SXA
MODEL 216.3 up to Model Year 08
MODEL 221.0/1 up to Model Year 08 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination
The exterior lights (ABL) include the following functions:
- Standing lights, parking lights actuation
- Standing lights actuation
- Light warning
- Parking lights actuation
- Driving lights actuation
- Low beam actuation
- High beam actuation
- Daytime running lamps actuation
- Auto on/off headlamps
- Automatic headlamp range adjustment (HRA [LWR])
- Driving lights additional function
- Cornering illumination
- Dynamic curve illumination
- Additionally for model 216 with code (622) Intelligent Light System (right-hand traffic):
- Motorway lights
- Extended fog light function
- Front fog lights actuation
- Front fog lamps actuation
- Rear fog lamps actuation
- Turn signal lamp actuation
- Turn signaling actuation
- Hazard warning flasher actuation
- Hazard warning flasher actuation with airbag triggering
- Stop lamp actuation
- Backup lamp actuation
- Headlamp delayed switch-off
- Substitute light and emergency light actuation
The front SAM control unit with fuse and relay module (N10/1) is the master control unit for the exterior lights (ABL). The rear SAM control unit with fuse and relay module (N10/2) is the master control unit for all turn signal functions.
The following control units are networked to each other over the interior CAN:
- front SAM control unit
- Left door control unit (N69/1) (model 216), Left front door control unit (N69/1) (model 221)
- Right door control unit (N69/2) (model 216), Right front door control unit (N69/2) (model 221)
- Rear SAM control unit
- Trailer recognition control unit (N28/1) (for code (550) Trailer hitch)
Actuations
The Xenon headlamp control units (E1n1, E2n1) are networked over the front end CAN with the central gateway control unit (N93).
The central gateway control unit detects the requests issued by the front SAM control unit over the interior CAN and makes them available to the Xenon headlamp control units on the front end CAN.
- The front SAM control unit actuates the following components:
- Left front lamp unit (E1)
- Right front lamp unit (E2)
- Left front fog lamp (E5/1)
- Right front fog lamp (E5/2)
- Left front side-marker lamp
(E6/1)
- Right front side-marker lamp
- The left door control unit actuates the following components:
- Left outside mirror turn signal lamp (E6/5)
- Left outside mirror ambient lamp (M21/1e1)
- The right door control unit actuates the following components:
- Right outside mirror turn signal lamp (E6/6)
- Right outside mirror ambient lamp (M21/2e1)
- The rear SAM control unit actuates the following components:
- Left taillamp (E3)
- Right taillamp (E4)
- Left license plate lamp (E19/1)
- Right license plate lamp (E19/2)
- Center high-mounted stop lamp (E21)
Vehicles with code (550) Trailer hitch
- The trailer recognition control unit actuates the trailer hitch socket (13-pin) (X58).
| Block diagram of exterior lights | GF82.10-P-0003-03SXA | ||
| Exterior lights, location of components | GF82.10-P-0003-02SX | ||
| Standing lights/parking lights actuation, function | GF82.10-P-3060SX | ||
| Headlamp control, function | GF82.10-P-2009SXA | ||
| Additional function for driving lights actuation, function | GF82.10-P-3050SX | ||
| Front fog lights actuation, function | GF82.10-P-3070SX | ||
| Turn signal indicator actuation, function | GF82.10-P-3008SX | ||
| Stop lamp actuation, function | GF82.10-P-3010SX | ||
| Backup lamp actuation, function | GF82.10-P-3011SX | ||
| Headlight switch off delay function | GF82.10-P-2011SX | ||
| Substitute lights and emergency lights actuation, function | GF82.10-P-3080SX |