LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> S400 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control - 221 Chassis - 2 Of 3 >> Testing & Repair >> Removing and installing rear air conditioning push-button control module >> Remove and install rear air conditioning push-button control unit - AR83.50-P-9070SX

Remove and install rear air conditioning push-button control unit - AR83.50-P-9070SX

MODELS 221.0/1 with CODE (582) Rear air conditioner 

Fig 1: Identifying Rear Air Conditioning Push-button Control Unit Remove/Install Components
G10129415Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
1 Unclip panel (1) at rear on center console and put down IMPORTANT Do not detach electrical connector of rear center air outlet potentiometer. AR68.20-P-5169SX
2 Remove rear air outlet (3) from panel (1) and place to one side Rechargeable drill/screwdriver *WH58.30-Z-1007-20A 
3 Detach electrical connector (4) and remove rear AC control unit (N22/4) from panel (1) Rechargeable drill/screwdriver *WH58.30-Z-1007-20A 
4 Install in the reverse order    
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1007-20A Cordless drill/driver