Remove/install bass module speaker - AR82.62-P-7839SXS

MODEL 221.1 with CODE (Z07) Top protection 

Fig 1: Locating Bass Module Speaker Foam Rubber

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear shelf		AR68.30-P-4580SXS
2	Press foam material (1) on screws (arrows) to one side and undo screws (arrows)
3	Raise bass module speaker (H4/17) and detach electrical connector	Check installation position of bass module speaker (H4/17).
4	Remove bass module speaker (H4/17)
5.1	Modify detachable parts of bass module speaker (H4/17)	Only when replacing the bass module speaker (H4/17).
6	Install in the reverse order