Blind Spot Assist wiring diagram - PE54.71-P-2100-97DAA
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212 as of 6/1/10 up to model year 2013 with CODE 234 (Blind Spot Monitoring) B29/4, B29/5
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 15A |
| B29/4 | Left rear bumper intelligent radar sensor | 10L |
| B29/5 | Right rear bumper intelligent radar sensor | 6L |
| CAN G | Front end CAN | 13K |
| N10/1 | Front SAM control unit with fuse and relay module | 14L |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N10/2f59 | Fuse 59 | 2L |
| W7/8 | Right wheelhouse trunk ground point | 7B |
| X172/2 | Rear bumper radar sensors electrical connector | 5E |
| Z36/17 | Rear sensor CAN connector sleeve | 10G |
| Z36/19 | Rear sensor CAN connector sleeve | 9G |
| Z36/35 | Rear radar sensors sensor power supply connector sleeve | 5G |
| Z36/36 | Rear radar sensors sensor ground connector sleeve | 7G |