Remove/install low temperature water circuit radiator - AR09.41-P-6935GQC

ENGINE 276.8 in MODEL 166 

Fig 1: Identifying Low Temperature Water Circuit Radiator Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of injury  to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning  from swallowing hydraulic fluid.	Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.	AS00.00-Z-0013-01A
1	Remove bumper		AR88.20-P-2000GQ
2	Remove left and right air duct segment
3	Drain off coolant at radiator for low-temperature water circuit (1) on lower connection (3)	To do this disconnect lower coolant hose at connection (3).
4	Disconnect coolant hose on lower connection (2)
5	Remove radiator for low-temperature water circuit (1) to the side	Removal:  Unclip radiator for low-temperature water circuit (1) above on carrier. For replacement of radiator for low-temperature water circuit (1), change or replace elastomer bearing (4).
6	Install in the reverse order
	Check
7	Check cooling system for leaktightness		AR20.00-P-1010GQ