Remove/install backup camera - AR54.65-P-0030GQ
MODEL 166 with CODE 218 (Reversing camera)
MODEL 166 with CODE 501 (360 degree camera)
Shown with CODE 218 (Reversing camera) up to model year 2014
Fig 2: Identifying Backup Camera Remove/Install Components - Shown With Code 501 (360 Degree Camera)
Shown with CODE 501 (360 degree camera)
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1.1 | Switch off ignition and remove transwithter key from electronic ignition lock control unit | MODEL 166 with CODE 218 (Reversing camera) without CODE 889 (KEYLESS-GO) MODEL 166 with CODE 501 (360 degree camera) without CODE 889 (KEYLESS-GO) |
|
| 1.2 | Detach KEYLESS GO start-stop button from electronic ignition lock control unit | MODEL 166 with CODE 218 (Reversing camera) with CODE 889 (KEYLESS-GO) MODEL 166 with CODE 501 (360 degree camera) with CODE 889 (KEYLESS-GO) |
|
| 2 | Remove lower and center door lining from tailgate | AR72.20-P-3520GQ | |
| 3 | Dismantle, release and detach electrical connections (1) for reversing camera (B84/3) or rear 360° camera (B84/10) from rear-end door | ||
| 4 | Release and disconnect electrical connections (3) of reversing camera (B84/3) from rear-end door | MODEL 166 with CODE 218 (Reversing camera) |
|
| 5 | Remove bolt (2a) | MODEL 166.0 up to model year 2014 with CODE 218 (Reversing camera) |
|
| 6 | Remove clamp (2) | ||
| 7 | Remove reversing camera (B84/3) or rear 360° camera (B84/10) from door handle | ||
| 8 | Install in the reverse order | ||
| 9.1 | Calibrate reversing camera (B84/3) using STAR DIAGNOSIS and calibration device | MODEL 166 with CODE 218 (Reversing camera) During initial startup or after working on the reversing camera (B84/3) or rear-end door |
|
| AD00.00-P-2000-04A | |||
| Fig 3 | |||
| 9.2 | Calibrate rear 360° camera (B84/10) using STAR DIAGNOSIS | MODEL 166 with CODE 501 (360 degree camera) At the in-service date or after working on the rear 360° camera (B84/10) or rear-end door |
|
| AD00.00-P-2000-04A |