Remove/install loudspeaker amplifier control unit - AR82.62-P-7720CY
MODEL 204.9 with CODE (810) Sound system
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Buffer basic data of sound system amplifier control unit (N40/3) in STAR DIAGNOSIS | When replacing the sound system amplifier control unit (N40/3). |
|
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 2 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | ||
| 3 | Open left cover (1) of cargo area paneling at side | ||
| 4 | Loosen bolts (2); do not remove completely | ||
| 5 | Take out sound system amplifier control unit (N40/3) with bracket (3) until electrical connector with fiber optic cable (5) and electrical connector (4) are accessible | ||
| 6 | Disconnect electrical connector with fiber optic cable (5) and cover equipment connector at sound system amplifier control unit (N40/3) | ||
| Notes on avoiding damage to fiber optic cables during repair work | With Media Oriented System Transport (MOST) | AH82.60-P-0001-05AK | |
| 7 | Disconnect electrical connector (4) | ||
| 8 | Unclip electrical wiring harness from bracket (3) | ||
| 9 | Unscrew nuts (6) and detach bracket (3) from sound system amplifier control unit (N40/3) | When replacing bracket (3) or sound system amplifier control unit (N40/3). | |
| 10 | Install in the reverse order |