Remove/Install Paneling On A-Pillar - AR68.30-P-4050WX

MODEL 166, 204.9, 207.3 

Fig 1: Identifying A-Pillar Cover, Retaining Clamp, Edge Guard And Bolt/Nut - Shown On Model 166

Courtesy of MERCEDES-BENZ USA

Illustrated on model 204.9 

	Remove/install
	Note on functional reliability of windowbag		AH91.60-P-0693-01A
1	Remove edge guard (2) in area of A-pillar paneling (1)
2	Unclip cover (3)	Mounting wedge	Figure
3	Unscrew bolt or nut (4)
4	Press off A-pillar paneling (1)	Directly move assembly wedge to retaining clips (5) and press off. Do not damage windowbag.
		Mounting wedge	Figure
5	Remove A-pillar paneling (1) out of dashboard guide upward
6	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA