Legend of electrical function schematic, offroad transmission mode - PE28.19-P-2051-60MAB
Model 164.1 with TRANSMISSION 722.9 as of model year 09/YoM 08 model refinement package
Model 164.8 with TRANSMISSION 722.9 as of model year 09/YoM 08
| Code | Designation | Coordinates |
|---|---|---|
| A7/3 | Traction system hydraulic unit | 11B |
| A7/7s1 | BAS release switch | 6D |
| B37 | Accelerator pedal sensor | 2K |
| L6/1 | Left front rpm sensor | 5A |
| L6/2 | Right front rpm sensor | 5B |
| L6/3 | Left rear rpm sensor | 5B |
| L6/4 | right rear rpm sensor | 5B |
| N3/9 | CDI control unit | 3B |
| N3/10 | ME-SFI [ME] control unit | 3F |
| N47-5 | ESP control unit | 9A |
| N72/1 | Upper control panel control unit | 13E |
| N72/1s25 | Offroad program switch | 13C |
| N93 | Central gateway control unit | 9E |
| U127 | Valid for engine 272, engine 273 KE | 2E |
| U152 | Valid for engine 156 | 2F |
| U557 | Not valid for offroad package | 13C |
| U880 | Valid for engine 642 | 2B |
| U882 | Valid for engine 629 | 2B |
| U932 | Valid for engine 642 BLUETEC | 2B |
| Y3/8 | Electric controller unit (VGS) | 9H |
| CAN B | Interior CAN | 11E |
| CAN C | Engine compartment CAN | 6E |
| CAN C | Engine compartment CAN | 9D |
| CAN C | Engine compartment CAN | 9G |
| 1 | Off-road program switch, status | 5E |
| 1 | Off-road program switch, status | 9C |
| 1 | Off-road program switch, status | 9G |
| 1 | Off-road program switch, status | 10E |