Legend Of Electrical Function Schematic For Common Rail Diesel Injection (CDI), Start Quantity Control - PE07.16-U-2764-60MAA
ENGINE 642.9 in MODEL 164 with CODE (U42) BLUETEC diesel exhaust gas cleaning as of Model Year 09
ENGINE 642.8 in MODEL 164 with CODE (U42) BLUETEC diesel exhaust gas cleaning as of Model Year 09
| Item | Designation | Coordinates |
|---|---|---|
| A8/1 | Transmitter key | 11C |
| B4/6 | Rail pressure sensor | 3J |
| B11/4 | Coolant temperature sensor | 6J |
| B37 | Accelerator pedal sensor | 2F |
| B70 | Crankshaft Hall sensor | 5J |
| N3/9 | CDI control module | 5E |
| N73 | EIS [EZS] control unit | 11C |
| Y3/8n4 | Fully integrated transmission control (VGS) control unit | 11H |
| Y74 | Pressure regulator valve | 3C |
| Y76 | Fuel injectors | 5B |
| Y94 | Volume control valve | 7C |
| CAN C | Engine compartment CAN | 9E |
| CAN C | Engine compartment CAN | 9F |
| 1 | Circuit 50, status | 7E |
| 2 | Fuel injectors, actuation | 5C |
| 3 | Accelerator pedal sensor, signal | 3F |
| 4 | Crankshaft Hall sensor, signal | 5H |
| 5 | Coolant temperature sensor, signal | 6H |
| 6 | Quantity control valve, actuation | 7D |
| 7 | Pressure regulator valve, actuation | 4D |
| 8 | Rail pressure sensor, signal | 4H |
| 9 | DIRECT SELECT gear selector switch, status | 7F |