Legend of electrical function diagram for common rail diesel injection (CDI), deceleration mode/quantity mean value adaptation - PE07.16-P-2766-60MAA
Model 164.1 with ENGINE 642.9 as of model year 09/AEJ 08 model refinement package
Model 164.8 with ENGINE 642.9 as of model year 09/AEJ 08
Model 164.1 with ENGINE 642.8 with CODE (U42) BLUETEC diesel exhaust gas cleaning (SCR) with AdBlue/DEF as of model year. 09/AEJ 08 model refinement package
Model 164.8 with ENGINE 642.8 with (U42) BLUETEC (SCR) diesel exhaust gas cleaning with AdBlue/DEF as of model year 09/AEJ 08
| Code | Designation | Coordinates |
|---|---|---|
| B2/6 | Left hot film MAF sensor | 10D |
| B2/7 | Right hot film MAF sensor | 10F |
| B37 | Accelerator pedal sensor | 9H |
| B70 | Crankshaft Hall sensor | 7H |
| G3/2 | O2 sensor upstream of catalytic converter | 5H |
| M16/6 | Throttle valve actuator | 11G |
| N3/9 | CDI control unit | 7D |
| Y27/9 | Left exhaust gas recirculation positioner | 7C |
| Y74 | Pressure control valve | 5C |
| Y76 | Fuel injectors | 4F |
| Y94 | Quantity control valve | 9C |
| 1 | Fuel injectors, actuation | 5F |
| 2 | Exhaust gas recirculation positioner, actuation | 7C |
| 3 | Pressure regulator valve, actuation | 6C |
| 4 | Quantity control valve, actuation | 9D |
| 5 | Crankshaft Hall sensor, signal | 7G |
| 6 | Hot film mass air flow sensor, signal | 9D |
| 7 | Hot film mass air flow sensor, signal | 9F |
| 8 | O2 sensor, signal | 6G |
| 9 | Accelerator pedal sensor, signal | 9G |
| 10 | Throttle valve actuator, actuation | 9G |