Auto pilot system (APS) operating description - GF82.61-P-0001-08GQ

Audio system, general 

The driver information system is operated using the:

• Control buttons on the radio and navigation unit (A2/56)
• Left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111)
• Voice control system (VCS [SBS]), (only with code (511) Audio 50 APS with DVD changer)

These operating instructions consist of the following subfunctions:

• Basic "AUDIO" function 
• "NAVI" basic function 
• )"TEL" basic function 
• Services (Short Message Service (SMS) and address book) 
• Control of audio signals (sound settings) 
• System settings 
• Media interface (with code (518) Media interface) 

Basic "AUDIO" function 

When the basic "AUDIO" function is activated, the audio application last used is started. If a different audio application is to be started, it is necessary to activate the menu line and select the "AUDIO" menu item.

The following audio sources can only be selected using the "AUDIO" menu item:

• "Radio" (AM/FM) menu 
• "Digital Audio Broadcasting (Digital Radio) (DAB) radio" menu (with code (537) Digital radio) 
• "CD audio" menu 
• "MP3" menu (on DVD/CD) 

The control buttons on the radio and navigation unit are used to make the selection or the settings.

"Radio" (AM/FM) menu 

If the "Radio" menu item is activated, the default screen appears. The following appears on the display:

• The current stations and the numbers of their memory locations ("station name" with radio data system (RDS))
• A cursor to select the station

Selection or settings via function bar:

• "Radio": "List of stations", "Save station", "Enter frequency", "Fixed frequency", "Traffic Announcement (TA)"
• "Memory": List of stored stations, automatic memory for automatic searching and saving of the stations with the best reception
• "FM": Selection of frequency band ("FM" "MW", "LW", "SW")
• "Sound": Configuration of audio output

The control buttons on the radio and navigation unit are used to make the selection or the settings.

"DAB radio" (with code (537) Digital radio) menu 

If the DAB radio menu item is activated, the default screen appears. The following appears on the display:

• Ensemble (DAB package for a region)
• The current stations and the numbers of their memory locations
• A cursor to select the station

Selection or settings via function bar:

• "DAB": Available subprograms, list of stations, save stations
• "Memory": List of stored stations, automatic memory for automatic searching and saving of the stations with the best reception
• "Ensemble": Selection of ensemble (DAB package)
• "Sound": Configuration of audio output

The control buttons on the radio and navigation unit are used to make the selection or the settings.

"CD audio" menu 

If the "CD audio" menu item is activated, the default screen is shown.

The following appears on the display:

• Number of tracks on the CD
• Current track with elapsed time
• Artist (if available on CD)
• Album

The following control options are available:

• Selection or settings using the function bar
• Track selection with skip function
• Fast Forward/Rewind

Selection or settings via function bar:

• "CD": Playback mode (artist, standard track sequence, random track sequence)
• Icons for "Start/Stop": Starting and stopping a track
• "Track list": List of tracks
• "Medium": Selection of playback source (with code (511) Audio 50 APS incl. DVD changer)
• "Sound": Configuration of audio output

The control buttons on the radio and navigation unit are used to make the selection or the settings.

Title selection using skip function:

The control buttons "left" or "right" on the radio and navigation unit enable the previous or next track in the track list to be played.

Fast forward/rewind

The playback position can be changed by pressing and holding the "left" or "right" control buttons on the radio and navigation unit.

"MP3" menu 

If the "MP3" menu item is activated, the default screen appears. The following appears on the display:

• Number of tracks in directory on the DVD/CD
• Current track with elapsed play time
• Artist

Selection or settings via function bar:

• "MP3": Play mode (e.g. standard track sequence, random track sequence, artist)
• "Medium": Selection of playback source (with code (511) Audio 50 APS incl. DVD changer)
• "Sound": Configuration of audio output

The control buttons on the radio and navigation unit are used to make the selection or the settings.

"NAVI" basic function 

If the basic "NAVI" function is activated, the default screen appears. The following selection options or settings are available via the function bar:

• "Guide": Selection of points of interest (POI) as the new destination
• "Traffic Message Channel (TMC)": Detailed display of TMC messages
• "Route": Route information ("Arrival time", "Distance", "Block route"). Only appears when a destination has already been entered.
• "Ear symbol": Repeat of acoustic route recommendation
• "Destination": Submenu in which destination options ("Destination entry", "Intermediate stop", "Cancel", "Continue", "Points of interest") can be set

The following navigation functions can be selected using the "NAVI" menu item:

• Destination entry
• Detail display of TMC messages
• Route information

The control buttons on the radio and navigation unit are used to make the selection or the settings.

Destination entry

The destination is entered via the "Destination" menu item. The default screen appears.

Selections or settings:

• "Cancel navigation": The navigation is interrupted. The "Continue destination-oriented navigation" menu item appears
• "Address entry": Entry of a destination address
• "Memory": Call up a destination address from the "Destinations" memory
• "Previous destinations": Calling up a destination address from the temporary "Destinations" memory
• "Save destination": Save an address entered in the navigation system
• "Points of interest": Call up a point of interest from the POI list
• "Intermediate stop": Specifying an intermediate stop (via destination)

Detailed display of TMC messages:

The TMC menu item provides a detail display of TMC messages. The default screen appears.

Selections or settings:

• "Display all messages": All TMC messages on the route are shown.
• "Read aloud all messages on route": All displayed messages are emitted over the vehicle speakers (Text to Speech (TTS) required).
• "Display messages (symbol)": Displays messages arranged according to freeways/roads.

If the destination-oriented navigation is not active when the TMC menu item is activated, a list of all available TMC messages is then shown.

The control buttons on the radio and navigation unit are used to make the selection or the settings. The TMC messages are shown as a list.

Route information:

Route information (arrival time, distance, block route) is displayed via the Route menu item. The default screen appears.

Selections or settings:

• "Route information": Information such as distance and time left to destination or intermediate stop is displayed.
• In the route browser, the calculated route can be scrolled through using the "Next" and "Previous" menu items.
• "Block route": Enables sections of the calculated route to be blocked.

The control buttons on the radio and navigation unit are used to make the selection or the settings.

)"TEL" basic function 

Comfort telephony variant (with code (386) Mobile phone) and basic telephony are available.

If the basic "TEL" function on the "audio equipment" is activated, the default screen is shown.

Selections or settings:

• "Telephone": Access (selection of phones available in the vehicle)
• "SMS": Calls up the SMS function (manages incoming messages only, SMS messages cannot be created or sent) (with code (386) Mobile phone)
• "Calls list": Access to calls list (missed, accepted, dialed calls)

A connection can be made as follows:

• Entry of telephone number using the keypad on the mobile phone
• Select telephone book entries with left multifunction steering wheel button group or right multifunction steering wheel button group
• Selection of telephone numbers from call list

Incoming calls are signaled acoustically and on the display of the radio and navigation unit. The control buttons on the radio and navigation unit are used to make the selection or the settings.

Services 

• SMS (with code (386) Mobile phone)
• Address book

SMS:

The SMS function is activated using the basic "TEL" function and then called up using the "SMS" menu item in the function bar.

Selections or settings:

• "Telephone": Access (selection) of phones available in the vehicle
• "Calls list": Access to call list (missed, accepted, dialed calls)

The control buttons on the radio and navigation unit are used to make the selection or the settings.

Address book:

The Address book service function is activated using the basic "TEL" function and then called up using the "Address book" menu item in the function bar.

Selections or settings:

• "Telephone": Calls up telephone function
• "Address book": Calls up address book function

The control buttons on the radio and navigation unit are used to make the selection or the settings.

Selections or settings:

• "Treble": Sets the treble
• "Bass": Sets the bass
• "Bal/Fad": Sets the balance and fading
• "Sound": Sets Surround Logic 7 On/Off sound options (with code (810) Sound system)

The control buttons on the radio and navigation unit are used to make the selection or the settings.

Control of audio signals (sound settings) 

The audio signals (sound settings) can be controlled using the "Sound" menu item. The default screen appears.

System settings 

System settings are made using the "System" menu item. The default screen appears. The following system settings can be made:

• "Language" submenu
• "Display" submenu
• "Time" submenu
• "Read speed" submenu (with code (511) Audio 50 APS incl. DVD changer)
• "Linguatronic" submenu (with code (511) Audio 50 APS incl. DVD changer)
• "Bluetooth" submenu
• "Reset" submenu

"Language" submenu 

The following languages are available for display on the radio and navigation unit:

• "Danish"
• "German"
• "English"
• "French"
• "Spanish"
• "Italian"
• "Dutch"
• "Portuguese"
• "Russian"
• "Swedish"
• "Turkish"

"Display" submenu

The following settings can be made:

• "Brightness"
• "Day screen"
• "Night screen"
• "Automatic"

The control buttons on the radio and navigation unit are used to make the selection or the settings.

"Time" submenu

The following settings can be made:

• "Set time"
• "Format"
• "Time zone"

"Read speed" submenu (with code (511) Audio 50 APS incl. DVD changer)

The following settings can be made:

• "high-speed" range
• "Medium"
• "Slow"

"Linguatronic" submenu (with code (511) Audio 50 APS incl. DVD changer)

The following settings can be made:

• "Display help window"
• "Further training"
• "Erase further training"
• "Follow-up training on"

"Bluetooth" submenu

The following settings can be made:

• "Bluetooth device list"
• "Activate Bluetooth"

"Reset" submenu

The settings can be reset to the manufacturer default settings.

Media interface (with code (518) Media interface) 

If the Audio menu item and the Media Interface function are activated, the following is shown in the display:

• "Play lists"
• "Artists"
• "Albums"
• "Genres" or "Audio books"

Selection or connection possibilities:

• "iPod"
• Universal Serial Bus (USB) devices
• Audio/video devices
• AUX devices

The selection or settings can be made using the control buttons of the radio and navigation unit or the left multifunction steering wheel button group and the right multifunction steering wheel button group.

The menu navigation and display of the connection options are shown on the display of the radio and the navigation unit and are dependent on the respective connected portable terminal.