LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> GL350 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - 164 Chassis - 2 Of 8 >> Basic Knowledge >> Audio mode, function >> Audio mode, function - GF82.85-P-2030GQE

Audio mode, function - GF82.85-P-2030GQE

MODEL 164.1 with CODE (510) Audio 20 with CD changer as of model year 2009/YoM 08 model refinement package 

MODEL 164.8, 251.0/1 with CODE (510) Audio 20 with CD changer as of model year 2009/YoM 08 

Function requirements 

General audio mode function sequence 

The audio mode function consists of the following function sequences:

Further subfunctions are described in separate service information:

Operating instructions 

Control, selection or adjustment of the audio functions is possible with the following components:

Radio mode function sequence (AM/FM) 

The function sequence is subdivided into the following subfunctions:

Radio mode function sequence (AM/FM) 

The rear window antennas or the FM/AM/RRCL [FZV] antenna (A2/93a1) in the roof antenna module (A2/93) receive high frequency (HF) signals for the FM and AM (MW, LW, SW) radio frequency bands. The following useful signals relevant for the radio reception are modulated onto these HF signals:

These HF signals from the rear window antennas are forwarded via direct lines to the FM rear window antenna amplifier (A2/19) and from there to the roof antenna module. These two amplifiers filter the frequencies of the radio frequency bands out of the received HF signals and amplify them. The amplified signals are then sent from the roof antenna module via coaxial lines (FM, AM) to the tuner integrated in the radio where they are demodulated.

The demodulated audio signals on vehicles with code (810) Sound system are transferred by the radio over the Media Oriented System Transport (MOST) to the sound system amplifier (N40/3) and amplified.

The audio is then output by the following speakers via direct lines:

IMPORTANT The audio signal for the subwoofer speaker travels via MOST from the radio to the sound system amplifier and from there, over the subwoofer amplifier (N40/9), via discrete lines, to the Subwoofer speaker.

IMPORTANT In vehicles without code (810) Sound system, the audio is output by the radio by means of direct lines over the following speakers:

AM tuner function sequence (MW/LW/SW) 

For the MW, LW and SW radio frequency bands, the useful signals are broadcast using amplitude modulation (AM). The AM tuner integrated into the radio demodulates these signals. In other words, it separates the useful signals (audible frequencies) from the carrier signal (inaudible).

FM tuner with phase diversity function sequence (FM/TMC) 

For the FM radio frequency band, the useful signals are broadcast using frequency modulation (FM). The FM tuner integrated into the radio demodulates these signals. In other words, it also separates the useful signals (audible frequencies) from the carrier signal (inaudible). The radio also enables an additional reception-specific changeover between the two antenna amplifiers. This function runs automatically.

RDS function requirements 

Function sequence for RDS 

Apart from the normal radio program, many radio stations transmit additional digital information such as station name, program type (e.g. pop, culture, etc.) and traffic program identification. The additional digital information is evaluated and displayed by the radio.

Disk function sequence 

The disc function sequence comprises the following subfunction sequences:

CD function sequence or MP3 

A 6-disk CD changer is integrated into the radio. The CD changer is used to read in the audio CDs (including in MP3 format) and they are internally processed by the radio. The user guidance for control of the CD functions (e.g. track selection) and for showing supplemental information (e.g. title) is accomplished on the radio display.

IMPORTANT The occupied CD slots are indicated on the radio display. CD slots "1" to "6" are numbered consecutively. The CD menu and title menu, which are also shown on the radio display, are stored on the inserted CD. This is why the functional scope and menu display are dependent on the actual CD inserted.

In vehicles with code (810) Sound system, the radio routes the audio signals via the MOST to the sound system amplifier, where they undergo final amplification.

The audio output is then sent from the sound system amplifier to the following speakers via direct lines:

IMPORTANT The audio signal for the subwoofer speaker travels via MOST from the radio to the sound system amplifier and from there, over the subwoofer amplifier, via discrete lines, to the subwoofer speaker.

IMPORTANT In vehicles without code (810) Sound system, the audio is output by the radio by means of direct lines over the following speakers:

AUX function sequence (without code (518) Media interface) 

If an external device (e.g. MP3 player) is connected via the AUX jack and the "AUX" menu item is called up, the base screen is displayed.

The following appears on the display of the radio:

The associated submenus can be called up on the radio display in the following menu items:

IMPORTANT The menu navigation and display of the connection options are shown on the display of the radio and are dependent on the respective portable terminal connected.

In vehicles with code (810) Sound system, the radio routes the audio signals via the MOST to the sound system amplifier, where they undergo final amplification.

The audio output is then sent from the sound system amplifier to the following speakers via direct lines:

IMPORTANT The audio signal for the subwoofer speaker travels via MOST from the radio to the sound system amplifier and from there, over the subwoofer amplifier, via discrete lines, to the subwoofer speaker.

IMPORTANT In vehicles without code (810) Sound system, the audio is output by the radio by means of direct lines over the following speakers:

REFER TO SYSTEM WIRING DIAGRAMS Electrical function diagram for audio mode, function Model 164 PE82.60-P-2058-97MAB
Model 251 PE82.60-P-2058-97RAB
  Digital Audio Broadcasting (DAB), function With code (537) Digital radio GF82.60-P-3020GQ
  Media interface function With code (518) Media interface GF82.60-P-2020GQ
scientia non olet · About LEMON Manuals