Glow pin, location/task - GF83.70-P-4005A
MODELS 168 with ENGINE 668.940 with heater booster
MODELS 202 with ENGINE 611.960 with heater booster
MODELS 210 with heater booster
MODELS 220 with ENGINE 613.960 with heater booster
MODELS 220 with ENGINE 628.960 with heater booster
MODELS 129 as of 1.6.97 with CODE (228) Stationary heater
MODELS 203 up to 23.4.04, models 210, 215, 220, 230 with CODE (228) Stationary heater
MODELS 463 as of 1.6.94 with CODE (H12) Auxiliary heater Webasto Tele Thermo Top S
MODELS 209.3 up to 31.5.04 with CODE (228) Stationary heater
Models 129, 168, 202, 203, 209.3, 215, 220, 230
| Glow pin location | The glow pin is inseparably integrated into the flame monitor glow pin unit (A6r4). The flame monitor glow pin unit (A6r4) is inserted into a mounting on the burner insert (1). | ||
| Model 210 up to 31.08.96 with engine 602.982 with heater booster Model 210 with code (228) Stationary heater Model 463 as of 01.06.94 with code (H12) Webasto Tele Thermo Top S auxiliary heater |
GF83.70-P-4005-01A | ||
| Glow pin task | The glow pin ignites the fuel/air mixture when heater operation is started. |