LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> G550 >> Repair and Diagnosis >> Electrical >> Gauges >> Entertainment, COMAND, Navigation, Steering Wheel Controls -- Basic Knowledge -- G-Class (463) >> Basic Knowledge >> Voice connection to vehicle, function - GF82.95-P-2006G

Voice connection to vehicle, function - GF82.95-P-2006G

MODEL 463.249 up to 31.8.08 as of model year 2007 model year 07.5, modification year 07 

MODEL 463.271 as of model year 2007 model year 07.5, modification year 07 

MODEL 463.237 as of model year 2009/YoM 08 

Function requirements, general 

Voice connection to vehicle, general 

Irrespective of the type of vehicle-related service triggered (e.g. MB-Info call), once the SMS has been sent an immediate voice connection is established with the service center and the customer can talk to a service receptionist.

Voice connection function sequence 

The hands-free system microphone group (A67b1) that is integrated into the inside rearview mirror unit (A67) is used for the voice input. Up to 31.8.08 the signal for the emergency call is looped through the voice control system control unit (A35/11) directly to the emergency call system control unit.

As of 1.9.08, the signal for the emergency call is looped through the COMAND operating, display and controller unit (A40/3) directly to the emergency call system control unit.

The communication module integrated into the emergency call system control unit then sends the hands-free system microphone group signals to the service center.

The communication module integrated into the emergency call system control unit is connected to the telephone and fax antenna (A2/22) using a discrete line via the radio and cell phone antenna splitter (A28/1). The latter transmits and receives the cellular phone signals.

The voice output occurs on vehicles up to 31.8.10 via the left front emergency call speaker (H4/46) and the right front emergency call speaker (H4/47) and on vehicles as of 1.9.10 via the center cockpit speaker (centerfill) (H4/27). These are actuated by the emergency call system control unit via direct lines.

At the same time, the emergency call system control unit sends a mute signal to the sound system amplifier (N40/9) via a discrete line in order to mute the other speakers:

Normally the voice connection is deactivated by the service center.

IMPORTANT Establishing a voice connection to the service center is aborted by the communication module integrated into the emergency call system control unit after several unsuccessful dialing attempts.

IMPORTANT In the event of a failure of the telephone and fax antenna (defective, e.g. because of a rollover), the communication module integrated into the emergency call system control unit automatically sends and receives the cellular phone signals via the emergency call antenna (A2/52).

  Component description for COMAND operating, display and controller unit A40/3
Model 463.249/271
GF82.85-P-3134GA 
    Model 463.237 GF82.85-P-3134GB 
  Sound amplifier, component description N40/9
up to 31.8.08
GF82.62-P-3009G
  Component description for sound system amplifier N40/9
As of 1.9.08
GF82.62-P-6003G
  Component description for emergency call system control unit N123/4 GF82.95-P-3212G 
  Telephone antenna, component description A2/22 GF82.62-P-4117G
  Emergency call antenna component description A2/52 GF82.95-P-4000G 
  Emergency call antenna splitter component description A28/1 GF82.95-P-4001G 
  Component description for voice control system (VCS [SBS]) control unit A35/11 GF82.70-P-4300G
  Inside rearview mirror unit, component description A67 GF68.49-P-2105G