Check brake disks for axial runout - AR42.10-P-0265GG
MODEL 460, 461, 463
| Remove/install | |||
| Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| 1 | Remove wheel. | ||
| Remove/install wheels, rotate if necessary | AP40.10-P-4050G | ||
| Checking | |||
| 2 | Check condition of brake disk | ||
| Check lining thickness of brake pads and condition of brake disks | AP42.10-P-4251G | ||
| 3 | Push back brake pads | ||
| 4 | Check wheel bearing play and adjust if necessary | Except for model 461.331, 463.270/271 | AR33.20-P-0300GG |
| Model 461.331, 463.270/271 | AR33.20-P-0300GX | ||
| 5 | Secure dial indicator with dial indicator holder to wheel carrier and align. | Fig 2 | |
| Fig 3 | |||
| 6 | Slowly turn brake disk by hand and read off axial runout at dial indicator. | Test values for front axle brake disk. | *BE42.10-P-1002-08C |
| Test values for rear axle brake disk | *BE42.10-P-1002-09C | ||
| 7 | Install in the reverse order | ||
| Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work | Before starting engine, actuate brake pedal several times until the pressure is built up and maintained in the brake system. | AS42.50-Z-0002-01A | |
| 8 | Push down brake pedal several times |
TEST VALUES FOR FRONT BRAKE DISKS
| Number | Designation | Model 460, 461, 463 without internally ventilated brake disks | Model 463 with internally ventilated brake disks, except model 463.270/271 | Model 463.270/271 | |
|---|---|---|---|---|---|
| BE42.10-P-1002-08C | Permissible axial runout of brake disc | mm | 0.1 | 0.15 | 0.1 |
TEST VALUES FOR REAR BRAKE DISKS
| Number | Designation | Models 461, 463 except 463.270/271 | Model 463.270/271 | |
|---|---|---|---|---|
| BE42.10-P-1002-09C | Permissible axial runout of brake disc | mm | 0.1 | 0.1 |