Hydraulic brake system - replacing brake fluid - AP42.50-P-4280G
MODEL 460, 461
MODEL 463 except CODE (979) Special protection version
Shows model 461.302
| Remove/install | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Clean | |||
| 1 | Clean cap and brake fluid reservoir (1) | ||
| 2 | Unscrew cap | ||
| 3 | Suction off brake fluid from the brake fluid reservoir (1) | AP42.50-P-4210G | |
| 4 | Fill with new brake fluid up to the "MAX" mark in the brake fluid reservoir (1) | ||
| General brake fluid | BB00.40-P-0330-01A | ||
| Brake fluids (DOT 4 plus) | BB00.40-P-0331-00A | ||
| 5 | Connect filling and bleeding unit on brake fluid reservoir (1) and switch on | Brake fluid changer with reservoir (10-20 l) |
|
| 6 | Remove front wheel-and-tire assemblies | AP40.10-P-4050G | |
| 7 | Pull caps off bleed screws | ||
| 8 | Carrying out bleeding operation | See ↓ Bleed brake system |
|
| Model 460, 461, model 463 except 463.270 /271 | AR42.10-P-0010GG | ||
| Model 463.270 /271 | AR42.10-P-0010GX | ||
| 9 | Replace brake fluid in clutch system | AP29.00-P-2981G | |
| Clean | |||
| 10 | Clean brake fluid off wheel brake cylinders, anchor plates, brake calipers and clutch slave cylinders | ||
| 11 | Install in the reverse order |