Electrical function schematic for driving conditions of the hybrid drive system - PE08.30-P-2069-97DAI
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 276.952 in MODEL 212.095 as of model year 2014
ENGINE 651.924 in MODEL 212.098/298 as of model year 2014
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Service brake, status | 2D |
| 10 | Discharge current for motor operation, energy flow | 20C |
| 11 | Charging current from alternator operation, energy flow | 18C |
| 12 | Charging current, energy flow | 17J |
| 13 | Charging voltage and charging current, signal | 8D |
| 14 | Electrical machine rotor position, signal | 18C |
| 15 | Charging voltage and charging current, request | 15D |
| 16 | High-voltage battery voltage, signal | 7H |
| 17 | High-voltage battery temperature, signal | 7H |
| 18 | Available torque, signal | 7D |
| 19 | Electric machine generative torque, signal | 7D |
| 2 | Accelerator pedal sensor, signal | 5H |
| 20 | Electric machine motor torque, signal | 8D |
| 21 | Wet clutch, status | 3H |
| 22 | Wet clutch, request | 3J |
| 23 | Discharge voltage and discharge current, request | 15D |
| 24 | Wheel speed, signal | 2D |
| 25 | Torque lowering/ESP dynamics, request | 2D |
| 26 | Torque change/DISTRONIC dynamics, request | 5D |
| 27 | Gear range, request | 3J |
| 28 | Gear range, status | 3H |
| 3 | Electric machine rpm, signal | 7D |
| 3 | Electric machine rpm, signal | 18C |
| 4 | Torque change/DISTRONIC dynamics, request | 18D |
| 5 | Electric machine, status | 7D |
| 6 | Tolerable discharge voltage/current, signal | 14D |
| 7 | Tolerable charging voltage/current, signal | 15D |
| 8 | Electric machine specified torque, request | 14D |
| 9 | Discharge current, energy flow | 17E |
| A100 | High-voltage battery module | 17J |
| A79/1 | Electric machine | 21C |
| A79/1b1 | Electric machine temperature sensor | 21E |
| B37 | Accelerator pedal sensor | 5K |
| CAN C | Drive train CAN | 3J |
| CAN E1 | Chassis CAN 1 | 3C |
| CAN E1 | Chassis CAN 1 | 6B |
| CAN L | Hybrid CAN | 6J |
| CAN L | Hybrid CAN | 12C |
| CAN L | Hybrid CAN | 12K |
| Code 23P | Driver assistance package | 11A |
| Flex E | Chassis FlexRay | 10B |
| L20 | Electric machine rotor position sensor | 21B |
| N129/1 | Power electronics control unit | 16C |
| N3/10 | ME-SFI [ME] control unit | 6E |
| N3/9 | CDI control unit | 3E |
| N30/6 | Regenerative braking system control unit | 3A |
| N62/1 | Radar sensors control unit | 13B |
| N82/2 | Battery management system control unit | 16K |
| N93/7 | Chassis gateway control unit | 8A |
| U74 | Valid for diesel engines | 2E |
| U75 | Valid for gasoline engines | 5E |
| Y3/8n4 | Fully integrated transmission control unit | 3K |