LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> CLS550 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Air Intake, Turbocharging - Torque Specifications) >> Torque Specifications >> Charge Air Pipe/Charge Air Cooling >> Charge air pipe/charge air cooling - BA09.41-P-1000-01O

Charge air pipe/charge air cooling - BA09.41-P-1000-01O

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 157, 278 

CHARGE AIR PIPE/CHARGE AIR COOLING

Number Designation ENGINE 157 ENGINE 278
BA09.41-P-1001-01O Bolt, charge air cooler to charge air distribution line Nm 9 9
BA09.41-P-1002-01O Bolt, throttle valve actuator to charge air cooler Nm 9 9
BA09.41-P-1003-01O Bolt, low temperature line holder to front cover Stage 1 Nm 4 4
Stage 2 ∠° 120 120
BA09.41-P-1004-01O Bolt, low temperature line clamp to bracket Nm 9 9
BA09.41-P-1005-01O Bolt, feed line to timing case cover Nm 9 9
BA09.41-P-1006-01O Bolt, coolant line to timing case cover/oil filter housing Nm 9 9
BA09.41-P-1007-01O Bolt, bleed lines hose fitting to timing case cover Nm 9 9
BA09.41-P-1008-01O Bolt, low temperature return line holder to cylinder head cover Nm 9 9
BA09.41-P-1009-01O Bolt, pressure transducer to bracket Nm 7 7
BA09.41-P-1010-01O Bolt, pressure transducer holder to charge air distribution line Nm 5 5
BA09.41-P-1011-01O Bolt, charge air distribution line to cylinder head Nm 9 9