Brake system - inspect fluid level - AP42.10-P-4210RQ

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 197.3/4

Fig 1: Identifying Expansion Reservoir

Courtesy of MERCEDES-BENZ USA

	Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes		AH42.50-P-0001-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Preparatory activity
1	Remove covering on brake unit	MODEL 197.3/4 with CODE B14 (Carbon-fiber engine compartment cover)
	Check
2	Check fluid level in expansion reservoir (1)
	General brake fluid		DOT 4. See GENERAL BRAKE FLUID (https://bevo.mercedes-benz.com/index.php?language_id=1)
	Brake fluids (DOT 4 plus)		MB 331.0 brake fluid A 000 989 08 07
	Brake fluids (DOT 4 plus)	The fluid level must be between the "Min." and "Max." markings on the expansion reservoir (1). If the fluid level is too low: ↓ Rectify problem subject to separate repair order. If the fluid level is too high: ↓ Extract brake fluid until the fluid level is at the "Max." mark.	MB 331.0 brake fluid A 000 989 08 07
	Finishing activity
3	Install covering onto brake unit	MODEL 197.3/4 with CODE B14 (Carbon-fiber engine compartment cover)