Remove/install left front or right rpm sensor - AR42.30-P-0712EW

MODEL 207, 212, 218 

Fig 1: Identifying Left Front/Right RPM Sensor Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Remove front wheel	Model 207	AP40.10-P-4050CW
		Model 212, 218	AP40.10-P-4050EW
2	Remove fender liner of front fender
3	Disconnect electrical connector of left front axle rpm sensor (L6/1) and right front axle rpm sensor (L6/2) at front axle electrical distributor		AR33.10-P-0100-06CW
4	Unclip electrical feed line of left front axle rpm sensor (L6/1) and right front axle rpm sensor (L6/2) from line bracket (3)	Ensure lines are installed correctly.
5	Remove bolt (1) and pull left front axle rpm sensor (L6/1) and right front axle rpm sensor (L6/2) out of steering knuckle (2)
6	Install in the reverse order
7	Connect STAR DIAGNOSIS, read and erase diagnostic trouble code memory		AD00.00-P-2000-04A