Remove/install front axle brake caliper - AR42.10-P-0070EWC
MODEL 207, 212, 218
Split floating caliper brake
| Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | AS42.50-Z-0002-01A | |
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| Remove/install | |||
| 1 | Detach brake hose (4) from brake caliper (3) | AR42.10-P-0013EW | |
| 2 | Unscrew screw/bolt (6) and remove right front brake wear sensor electrical connector (S10/2x1) | When removing brake caliper (3) on right side of vehicle. | |
MODEL 207 Split floating caliper brake MODEL 212 (except 212.061/074/075/076/077/092/274/275/276/277/292) Split floating caliper brake MODEL 218 (except 218.374/375/376/392/974/975/976/992) Split floating caliper brake |
*BA42.10-P-1002-10J | ||
| 3 | Remove brake linings (5) | AR42.10-P-1610EWC | |
| 4 | Unscrew brake caliper (3) from brake hose (4) | AR42.10-P-0013EW | |
| 5 | Install in the reverse order | ||
| 6 | Bleed brake system | AR42.10-P-0010EW |
FRONT AXLE BRAKE CALIPER
| Number | Designation | MODEL 207 | MODEL 212 (except 212.061/074/075/076/077/092/274/275/276/277/292) | |
|---|---|---|---|---|
| BA42.10-P-1002-10J | Bolt, brake wear sensor to brake caliper | Nm | 8 | 8 |
FRONT AXLE BRAKE CALIPER
| Number | Designation | MODEL 218 (except 218.374/375/376/392/974/975/976/992) | |
|---|---|---|---|
| BA42.10-P-1002-10J | Bolt, brake wear sensor to brake caliper | Nm | 8 |