Check condition of additional battery - AR54.10-P-1128SX
MODEL 216, 221 with CODE (B03) ECO start/stop function
Shown on model 216
| Removing | |||
| Risk of explosion caused by oxyhydrogen gas. Risk of poisoning and caustic burns caused by swallowing battery acid. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| Notes on battery | AH54.10-P-0001-01A | ||
| Notes on AGM battery | AH54.10-P-0002-01A | ||
| 1 | Remove center paneling (1) in trunk | AR68.30-P-4600SX | |
| Checking | |||
| 2 | Visually inspect additional battery for ECO start/stop function (G1/13) for signs of external leaks | Remove/install additional battery for ECO start/stop function (G1/13) |
AR54.10-P-0007SXS |
| Dispose of on-board electrical system battery | OS54.10-P-0001-01Z | ||
| 3 | Charge additional battery for ECO start/stop function (G1/13) | AR54.10-P-1129-01A | |
| Cold test current Battery tester gotis://E_15/54_02.0 |
*BE54.10-P-1002-01A | ||
| 4 | Reduce increased voltage after charging process | For an additional battery for ECO start/stop function (G1/13), that has been detached from the on-board electrical system, and if the "Surface voltage" message is shown on the Midtronics battery test/test equipment display. Battery tester gotis://E_15/54_02.0 |
AR54.10-P-1129-03A |
| 5 | Charge additional battery for ECO start/stop function (G1/13) | With the test code "Charge and check" on the Midtronics battery tester. |
AR54.10-P-1130SY |
| Install | |||
| 6 | Install center paneling (1) into trunk | AR68.30-P-4600SX |
TEST AND ADJUSTMENT VALUES FOR THE BATTERY
| Number | Designation | 12 AH | |
|---|---|---|---|
| BE54.10-P-1002-01A | Cold test current as per EN | A | 170 |