Remove/install Parktronic system (PTS) control unit - AR54.65-P-0006SC
MODEL 216.3
| Remove/install | |||
| Notes on avoiding damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1.1 | Buffer basic data of the PTS control unit (N62) in STAR DIAGNOSIS | When installing new Parktronic control unit (N62). |
|
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| STAR DIAGNOSIS diagnosis system | *WE58.40-Z-1013-06A | ||
| 2 | Switch off ignition and withdraw transmitter key or Keyless Go start/stop button from the EIS [EZS] control unit | ||
| 3 | Remove spare tire well panel, loosen panel in side of luggage compartment and move to one side until PTS control unit (N62) is accessible | AR68.30-P-4600SX | |
| 4 | Undo nut (1), unscrew nut (2), remove bracket (3) and place to one side with lines still attached | ||
| 5 | Separate electrical connectors on the PTS control unit (N62) | ||
| 6 | Remove PTS control unit (N62) | ||
| 7 | Install in the reverse order |
WORKSHOP EQUIPMENT/MB TESTERS
| WE58.40-Z-1013-06A | STAR DIAGNOSIS Compact diagnosis system for passenger cars, order number 6511 1801 00 |