Charge battery - AR54.10-P-1130SY

MODEL 216.3 as of 6/2/08 

MODEL 216.3 up to 6/1/08 with code 809 (Model year 2009) 

MODEL 221.0/1 as of 6/2/08 

MODEL 221.0/1 up to 6/1/08 with code 809 (Model year 2009) 

Shown on model 221 

Fig 1: Identifying Charge Battery Components - Shown On Model 221

Courtesy of MERCEDES-BENZ USA

	Check
1	Check condition of battery		AR54.10-P-1129SY
	Remove
2	Remove cover of engine compartment prefuse box (F32/3)
	Charging
3	Connect charger positive terminal (1) to charging terminal point (4) of engine compartment prefuse box (F32/3)
4	Connect charger ground terminal (2) to ground terminal point (3) on wheel well and switch on charger	Do not reverse polarity. Risk of short circuit! Use a charger with at least 30 A charging current and 13.5 V charging voltage, otherwise the on-board electrical system battery could be partially discharged.
5	Charge on-board electrical system battery (G1)
	000 588 00 81 00 Charger		WS54.00-P-0037B
		The battery charging period is dependent on the charge level of the discharged battery. The battery must be charged using an approved charger . The battery is sufficiently charged when the displayed charging current shown is < 25A material.
6	Disconnect battery charger	Switch off charger beforehand. Risk of arcing.
	Check
7	Check battery		AR54.10-P-1129SY
	Install
8	Install cover of engine compartment prefuse box (F32/3)