Prepare longitudinal member front section - AR62.20-P-1260-05SX
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm |
WORKSHOP EQUIPMENT
| WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
The following operation steps are shown on the left component for model 221 and must be performed analogously on the right side in the event of damage.
- Grind mating surfaces on longitudinal member front section (1) down to bare metal in cross-hatched areas with
round wire brush.