Remove/install door holder - AR72.10-P-2100SC

MODEL 216.3

Shown with code (810) Sound system

Fig 1: Identifying Door Holder Components

Courtesy of MERCEDES-BENZ USA

MODIFICATION NOTES

17.3.09

Value modified: Bolt for door holder to inner door panel

	Remove/install
1	Loosen left and right door lining from door with electrical lines connected. Then completely close crank window.		AR72.10-P-1000SC
2	Remove electrical connectors from left door control unit (N69/1) or right door control unit (N69/2) and remove door lining.
3.1	Remove left door sound woofer and midrange speaker group connector or right door sound woofer and midrange speaker group connector.	On vehicles with code (810) Sound system	AR82.62-P-7845SC
4	Loosen door foil (2) from inner door panel until nuts (3) and assembly opening (4) are accessible.	Do not cut door foil (2) but butyl cord to which door foil (2) is glued. Installation : Install new butyl cord parallel to damaged butyl cord and firmly roll down door foil (2) in area of new butyl cord.
			*168589056300
		Sealing cord	*BR00.45-Z-1086-01A
5	Unclip grommet (6) from door.		*115589035900
		Installation : Use liquid lubricant. Antifriction agent	*BR00.45-Z-1010-06A
6	Press door holder (1) off of bracket (5) with suitable screwdriver.	Carefully unclip door holder (1). Use rag to protect against paint damage.
7	Unscrew nuts (3)		*BA72.10-P-1015-01Q
8	Remove door holder (1) from door toward rear through assembly opening (4).
9	Install in the reverse order

FRONT DOOR

Number	Designation		Model 216
BA72.10-P-1015-01Q	Bolt for door holder to inner door panel	Nm	16

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Roller (168 589 05 63 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1086-01A	Soft top frame sealing profile with metal core 35 m, SEALANT/butyl Bostik 1127	A 005 989 12 71 10
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 I	A 000 989 03 67