Retrofit iPod interface - AZ82.60-P-0014SC

MODEL 216.3## 1# up to 31.5.09 except CODE (498) Japan version 

with CODE (386) Preinstallation for telephone "Cell phone", UPCI [UHI] system 

with CODE (388) Telephone "Cell phone", UPCI [UHI] system 

with CODE (389) Mobile phone preinstallation with universal interface, USA/Canada 

Fig 1: Identifying iPod Interface Components

Courtesy of MERCEDES-BENZ USA

	Remove
1	Disconnect battery ground line		AR54.10-P-0003SX
2	Remove COMAND controller unit		AR82.85-P-1100SC
3	Remove glove compartment		AR68.10-P-1400SX
	Install
4	Retrofit iPod interface wiring harness		AZ82.60-P-0001-01SC
5	Retrofit iPod wiring harness		AZ82.60-P-0001-02SC
6	Retrofit iPod interface		AZ82.60-P-0001-03SC
7	Install remaining parts onto vehicle
8	Affix cradle (3) in glove box (4) with MB universal adhesive as per picture	MB universal glue	*BR00.45-Z-1003-02A
9	Connect iPod (7) to iPod coupling (2) in glove box (4)
10	Place iPod (7) in cradle (3)
11	Connect STAR DIAGNOSIS
12	Perform retrofit variant coding	Perform variant coding with Star Diagnosis to activate the AUX function of the COMAND.
13	Close STAR DIAGNOSIS
14	Carry out function check	Check iPod functions as per iPod operating instructions in vehicle.