LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> CL550 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System - Body - 216 Chassis - 2 Of 9 >> Basic Knowledge >> Mobile phone system, operating instructions - GF82.70-P-0007-07LE

Mobile phone system, operating instructions - GF82.70-P-0007-07LE

MODEL 216, 221 up to 31.5.09 with CODE (389) Mobile phone preinstallation with universal interface, USA/Canada with CODE (386) Preinstallation for telephone "Handy", UPCI system 

MODEL 216 except CODE (498) Japan version as of Model Year 2010 /AEJ 09 

MODEL 221 except CODE (498) Japan version as of Model Year 2010 /AEJ 09 MOPF 

These operating instructions consist of the following subfunctions:

IMPORTANT The rapid pace of technical development and the variety of mobile phones on offer with their various technology standards can lead to problems in terms of compatibility with some of the control functions described in the following.

Establishing a telephone connection - making a call 

The "Establishing a telephone connection - making a call" subfunction consists of the following subfunctions:

Dialing using keypad on mobile phone 

Handsfree mode is active if the mobile phone keypad is used for dialing. Telephone numbers can be selected from the mobile phone telephone book.

Dialing using the center console button group 

The telephone menu must be activated on the COMAND controller unit (A40/3). The number entered is dialed by pressing the "Send" button. Handsfree mode is active if the center console button group is used for dialing.

Dial using the multifunction steering wheel 

The mobile phone telephone book is selected using the menu on the instrument cluster (A1) display. The name of the person to be called is selected by scrolling forward and back using the scroll forward/back button (S110s1). The OK button (S110s6) or the Accept/terminate phone call button (S111s3) can be used to activate the call on the steering wheel.

Dialing by pressing the "Send button" 

The call list of "Dialed numbers" can be displayed and numbers dialed from it.

Dialing using VCS [SBS] 

The VCS [SBS] is activated by pressing the VCS [SBS] on button (S111s4). An acoustic signal is emitted after activation has taken place.

Voice commands are e.g.:

Dialing using MMS 

The MMS telephone function can be selected via the "Tel" menu or via the Telephone/Navigation quick select button (A40/9s5) on the front central operating unit (A40/9).

Here, the user has the following options for dialing a telephone number:

The name of the person who you wish to call can be selected in the address book and the call lists by scrolling up and down.

The call is activated using the "SEND" function.

Establishing a telephone connection - receiving a call 

Incoming calls are indicated acoustically using the vehicle speaker system. At the same time the volume of the currently active audio source (e.g. the radio) is lowered. The audio source is not muted until the user accepts the call.

Incoming calls are also shown graphically:

Up to 31.5.09:

As of 1.6.09

The call can be answered using the front central operating unit, using the buttons on the mobile phone and using the Accept/terminate phone call button or using the center console button group.

Handsfree mode 

Accepting a call by:

Up to 31.5.09:

As of 1.6.09

Private mode 

When in "private mode" the user can make a telephone call without other vehicle occupants being able to hear the conversation.

Up to 31.5.09:

With the UPCI [UHI] (Universal Portable Cell Phone Interface) control unit, "private mode" is also possible using a Bluetooth headset. "Private mode" is activated by pressing the button on the headset.

Pressing the button (once) again ends the call. Pressing a second time within t = 3 s switches into handsfree mode or from handsfree mode back to "private mode" (this function is dependent on the particular headset).

As of 1.6.09: By removing the mobile phone from the UPCI [UHI] (Universal Portable Cell Phone Interface) cell phone holder (A34/15) or the rear handset from the rear handset cradle (with code (856) 2nd handset in rear armrest) the telephone call is accepted in "Private mode" (this function depends on the Universal Portable Cell Phone Interface cell phone holder variant).

Terminating/aborting/rejecting a call 

The user can terminate the telephone call or reject an incoming call at any time. The user has the following options for terminating or rejecting the connection:

Toggling 

The user can switch back and forth between telephone calls with two people.

The following controls are available to the user:

While the user talks to one person on the line, the connection to the other is put on hold.

A conference call, i.e. simultaneous communication with several callers, is also possible. This function can only be operated on the central front operating unit as well as on the control buttons of the mobile phone or the control buttons of the rear handset (with code (856) 2nd handset in rear armrest)

Using the front central operating unit, the multifunction steering wheel and the center console button group only the following is possible on vehicles up to 31.5.09 with code (386) Preinstallation for telephone "Cell phone", UPCI [UHI] system:

Accepting a call waiting call and simultaneously ending all existing calls 

If the user is conducting a call or two calls using the toggling function, when another incoming call is received it is displayed in the multifunction display and in the COMAND display or SPLITVIEW display. A third incoming call is not displayed if two calls are already underway.

If the user decides to accept the waiting call, the existing calls are terminated on mobile phones with a Hands Free Profile (HFP) 1.0. On mobile phones with HFP 1.5 the existing call is held.

SMS 

In vehicles with code (386) Comfort telephony SMS messages are imported by the COMAND controller unit when it is connected to the mobile phone. The imported messages are placed in the "Inbox" list on the COMAND controller unit.

On receiving a new SMS message, an acoustic signal is output by the COMAND controller unit and a symbol is displayed in the COMAND display or SPLITVIEW display.

Up to 31.5.09 without code (494) USA version, the user can also compose SMS messages and send them via the mobile phone: The parameters for sending SMS messages (such as the service provider no., memory time) are supplied by the COMAND controller unit itself. If there are no parameters stored, then the parameters of the mobile phone are used.

With code (494) USA version, the user is only able to receive SMS messages.

Only those SMS messages that were received while the mobile phone was in the UPCI [UHI] (Universal Portable Cell Phone Interface) cell phone holder are loaded onto the UPCI [UHI] (Universal Portable Cell Phone Interface) control unit and displayed in the COMAND display.

As of 1.6.09 (with code (386) Comfort telephony): It is only possible to compose an SMS message using the mobile phone.

"Voice mail" (with code 389) Mobile phone preinstallation with universal interface USA/Canada) 

If absent when a call is received, a "voice mail" will be sent by the provider. The receipt of a voice mail is signaled by a symbol at the top right of the COMAND display.

Communication via rear handset 

(with code (856) 2nd handset in rear armrest) 

With the rear handset it is possible to operate a mobile phone that is authorized at the COMAND controller unit.

The rear handset makes the following functions possible:

Bluetooth® mobile telephone adapter 

(with code (379) Telephone module with Bluetooth SAP) 

Operation is as for the mobile phone system with code (386) Comfort telephony, with the exception of the following special features:

Authorize 

The Bluetooth® mobile telephone adapter is connected using the "Connect SAP module" entry in the Telephone menu to the COMAND controller unit (authorized).

Proceed as follows to do so:

IMPORTANT If a SIM card is not plugged in to the Bluetooth® mobile telephone adapter, the Bluetooth® mobile telephone adapter can use a SIM card of a Bluetooth-compatible mobile phone in the vehicle if the mobile phone supports the SIM Access Profile (SAP).

As soon as Bluetooth® mobile telephone adapter is connected to the COMAND controller unit, the "Connect SAP module" menu entry is replaced by "Disconnect SAP module".

"SAP telephones" menu entry 

The "SAP telephones" menu entry leads to a list of devices which matches the lists for Bluetooth® telephones. Special features of the SAP module unit list are the "Save PIN" and "Ring tones" functions under "Options". In "Ring tones", one of ten ring tones can be selected on the Bluetooth® mobile telephone adapter for the telephony via the Bluetooth® mobile telephone adapter.

scientia non olet · About LEMON Manuals