Remove/install 12 Volt socket - AR54.10-P-1000TX

MODEL 168, 169, 170, 171, 197, 203, 204 (except 204.9), 208, 209, 210, 211, 216, 219, 221, 245

MODEL 230 without CODE P99 (Special model "AMG Black Series")

Shown on model 219

Fig 1: Identifying 12 Volt Socket Remove/Install Components - Shown On Model 219

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition
2	Open flap (1) of interior socket (X58/1)
3	Unlock the interior socket (X58/1) with the pliers (2) and pull out until the electrical connector (3) is accessible	The pins of the pliers (2) must engage in the housing cutouts for the interior socket (X58/1) (arrows).
3		Pliers	Figure
4	Detach electrical connector (3) and remove interior socket (X58/1)	Check for correct installation of interior socket (X58/1).
5	Install in the reverse order

Fig 2: Identifying Pliers (169 589 00 37 00)

Courtesy of MERCEDES-BENZ USA