Legend of electrical function diagram for windshield wash - PE82.35-U-2051-60FAA
MODEL 204
| Item | Designation | Coordinates |
|---|---|---|
| A8/1 | Transmitter key | 3F |
| Code 614 | Bi-xenon headlamp unit | 3A |
| M5/1 | Windshield washer system pump | 8K |
| M5/2 | Headlamp cleaning system pump | 4B |
| M6/1 | Wiper motor | 10A |
| N10/1 | Front SAM control module with fuse and relay module | 7E |
| N10/2 | Rear SAM control module with fuse and relay module | 5J |
| N73 | Electronic ignition switch control unit | 2E |
| N80 | Steering column module control unit | 12E |
| S4 | Combination switch | 10E |
| S62 | Engine hood anti-theft alarm system switch | 3J |
| CAN B | Interior CAN | 6H |
| CAN E | Chassis CAN | 4F 9F |
| LIN 2 | Wiper/inside rearview mirror LIN | 8D |
| 1 | Circuit 15, status | 5E |
| 2 | Combination switch, switch position | 8E |
| 3 | Windshield washer system pump, actuation | 9H |
| 4 | Wiper motor, actuation | 9C |
| 5 | Engine hood anti-theft alarm system switch, signal | 5F 6J |
| 6 | Engine hood anti-theft alarm system switch, status | 6G |
| 7 | Headlamp cleaning system pump, actuation | 5C |